VS Factory Rolex GMT Master II m126710blro-0001 Super Clone Watch Dual Time Zone

Rolex GMT Master II m126710blro-0001 super clone watch Review

Details determine quality. Today, we are evaluating the Rolex Master II m126710blro-0001 super clone watch from VS factory. This watch has been on the best-selling list since its launch. Is this watch really excellent in quality or touted by capital flow?

Today, we will make a multi-dimensional real evaluation from the movement, appearance, workmanship, evaluation and details, so as to provide a professional opinion reference for cousins.

Disassembly of 3285 integrated movement produced by VS factory

The movement is the lifeblood of a watch. Today, this Rolex Master II super clone watch from VS Factory is equipped with a self-made 3285 integrated movement. After professional disassembly of the movement, the structure and layout of this movement are the perfect restoration of the original movement. Open the cover and you can directly see the parameters of the movement:

1. Power reserve: 70 hours
2. Size: 31mm in diameter and about 6.3mm in thickness.
3. Travel accuracy: daily error 2-4 seconds/day.
4. Vibration frequency: 28,800 times/hour (4Hz)
5. Gemstone number: 31 diamonds (including 27 ball bearings)
6. Balance wheel position: 6 o’clock

The parts of the movement are basically interchangeable with the original movement, and the interchangeability of parts can address maintenance issues caused by wear and tear from long-term use of the movement.The appearance of this movement is also highly restored.

The Geneva pattern of the main splint is polished, the edge is chamfered and the wire drawing is even. The pearl lines and lettering of the automatic splint are clearly visible and the lettering is clear; Under the balance wheel, the ES9, the movement number and the steel seal of the gem hole are as standard as the original; The screw parts are made of blue steel screws, and the head is carefully polished, very round and without burrs.

Appearance parameters of Rolex Master II super clone watch from VS factory

Details determine success or failure, and a slight error in parameters will lead to the appearance of the watch becoming very fake and inferior. What VS Factory has done in this regard is recognized as good. It purchased the original at a high price and came back for 3D scanning for 1: 1 mold opening.

The synchronized watch is about 40mm, and the measured tolerance is less than ＜0.02mm；; The thickness of the case is about 12.1mm, which is consistent with the genuine product; The angle, radian and aperture of the lugs shall be opened in strict accordance with the genuine products, and the spacing between lugs shall be 20mm. All parameters are strictly controlled, and the details of appearance are for the sake of Excellence.

How about the workmanship of Rolex Master II in VS factory?

This watch feels very good at first sight, but it is not the standard of VS factory. What VS Factory has done is that it can stand the test even if it is enlarged. Through the enlarged detail map and video, we can really see that the color of the watch is very right, and there is no color difference. Looking more closely at the craftsmanship, when worn or handled, there is no sense of burrs at all; it is very smooth. The polishing and brushing dual process delicately treats the case and other exterior surfaces, ensuring a good wearing experience.

Ceramic coke ring

This watch of Rolex Master II also has a common name “Coke Circle” in the circle, which means that the bezel looks like Coke. The bezel is made of high-quality wear-resistant and scratch-resistant ceramics. The Mohs hardness of this material is second only to that of diamonds, which can well deal with the hanging problem caused by careless contact with hard objects in daily wear. The depth of the markings on the bezel is the same as the genuine product, different from the flatness of lower versions, and there is no glue overflow in the luminous pearl filling.

Usage of Rolex Master II super clone watch in VS factory with dual time zones

This watch is equipped with a 3285 integrated movement produced by VS factory, and its independent time jump, GMT hand and two-way rotating bezel are exactly the same as the genuine ones. The crown is divided into three grades, and it is waterproof when screwed down. Pull the first gear to adjust the hour hand independently, which can adjust the local time; Pull the second gear to adjust the minute hand and GMT red needle.

The specific operation is to pull the second gear, adjust the accurate time, and let the red target the quasi-hometown time; Push back to the first gear, adjust the hour hand to your local time separately, and then tighten the crown to complete the adjustment. If you go abroad, you only need to pull one gear, just adjust the hour hand independently, and the red hand on the dial, which is the minute hand, will not change.

Rolex GMT Master II m126710blro-0001 Watch Information

• Case: High-quality 904L stainless steel
• Dial: Black
• Crystal: Sapphire crystal/scratch-resistant
• Strap: High-quality 904L stainless steel
• Clasp: Folding clasp
• Movement: Clone 3285 movement
• Size: 40mm/Men’s watch
• Functions: Large calendar/Dual Time Zone
• Case back: Close bottom
• Water: 100m

What is super clone watch?

This standard refers to a watch that is a complete 1:1 clone of the original. From appearance and details to craftsmanship, size, and movement, everything is exactly the same as the original. Some parts are even interchangeable with the original. This VS Factory Rolex GMT Master II m126710blro-0001 Super Clone Watch Dual Time Zone, boasts a simulation accuracy of over 95%, allowing you to experience its true nature for less than 10% of the price of the genuine article. It not only enhances the wearer’s style but also showcases your taste and appreciation for the brand.

Top custom Version clone watches

we also offer high-end clone custom watches, such as: genuine diamond watches, 18K gold-plated watches, alligator leather straps, dial modifications, Swiss movement watches, and more. We have our own diamond setting factory and electroplating factory. We also supply parts and processing services to many well-known factories, such as Clean Factory、VS Factory、 APS Factory、 AF Factory etc.

1:1 Clone Watch Brand

Our store offers watches from numerous clone brands, including Rolex, Omega, Cartier, Patek Philippe, Audemars Piguet, Jaeger-LeCoultre, and more. Besides being more affordable, their appearance is extremely similar to the genuine articles, making them virtually indistinguishable from the real thing. Basic models primarily display time and date, equipped with hour, minute, and second hands. More advanced models feature more complex functions such as chronographs, moon phase displays, day-date displays, flyback chronographs, perpetual calendars, and alarms.

In the fashion world, watches have long been an essential accessory. Choosing a watch is not just about telling time, but also a way to showcase personal taste and personality. For over a decade, we have been striving to meet the diverse needs and preferences of our customers!

If you’re looking for a beautiful, high-quality watch, you’ve come to the right place. You can view this VS Factory Rolex m126710blro-0001 Super Clone Watch: Price, Pictures, Videos, Reviews. etc. It’s definitely your ideal choice. Buy with confidence; we conduct rigorous quality inspections and controls before shipping. We use professional instruments to test the movement’s accuracy, and we have a well-established team and a professional QC department, along with professional pre-sales and after-sales service! Welcome to cooperate!